Home > Burnished Slate & Tan Metal Building Colors

Metal Building Color Combination

Burnished Slate roof, Tan sides, Brown trim, Burnished Slate wainscot

One of the color combinations our customers order most, shown on a 24' x 25' metal garage with a white roll-up door. Open the design in 3D to price it on your own size and style, or change any of the four colors before you do.

Burnished Slate roof, Tan sides, Brown trim, Burnished Slate wainscot on a 24' x 25' metal garage with a white roll-up door
  • Roof panelsBurnished Slate
  • Side panelsTanAlso called Rawhide Tan
  • TrimBrown
  • WainscotBurnished Slate

Price This Combination On Your Building

The design below is already set to these colors. Change the size, style, doors, and windows, and the price updates on screen. Save it or submit it for a free quote when you are ready.

Loading your 3D design…

Pricing in the designer is for the delivery state saved with the design. Change the delivery state inside the designer, or choose your state below to build the same colors in your state's own 3D builder.

Why This Combination Works

Earth tones front to back. A deep brown-gray roof sits over warm Tan walls, Brown trim outlines the corners, eaves, and door, and a Burnished Slate wainscot grounds the building while hiding the mud and dust that splash up at the base. It reads like a ranch outbuilding and sits quietly against trees, pasture, or a brick house.

Make It Yours

  • Lighter walls: swap Tan for Beige and keep everything else.
  • Darker base: use Brown for the wainscot as well as the trim.
  • Cooler version: Q. Gray walls under the same Burnished Slate roof.

Every color on the color chart can go on any part of the building.

Where Each Color Goes

RoofBurnished SlateRoof panels and, unless you ask otherwise, the ridge cap.
Side panelsTanWalls and end walls on enclosed buildings, storage sections, and covered sides.
TrimBrownCorners, eaves, and the trim around doors and windows.
WainscotBurnished SlateThe band along the bottom of the walls. Optional - add or remove it in the designer.

Trim and the ridge cap are color-matched to the roof unless you tell us otherwise, so name the trim color when you order if it is different, as it is here.

Questions About This Combination

Can I change one of these four colors?

Yes. Open the design in the 3D designer and change the roof, walls, trim, or wainscot to any color on the chart. The picture updates on screen as you go, and you can save the new version or submit it for a quote.

Does this combination work on a carport, not just a garage?

Yes. An open carport uses the roof and trim colors; a combo unit or RV cover with side panels adds the wall color; and any structure with walls can take the wainscot band. Pick the structure in the designer and the same Burnished Slate, Tan & Brown colors carry over.

Will the colors look exactly like the picture?

Treat the picture and the swatches as a close guide. Screens differ in brightness and color, so if you are deciding between two similar shades, call us at 1-800-324-5315 and we will help you choose before your order is released to the factory.

What if the designer doesn't show pricing for my zip code?

Choose your state below. Every state we serve has its own 3D builder with local pricing, and you can build the same combination there. Color names can differ slightly by manufacturer, so check the color chart if a name you expect is missing.

Ready To Order These Colors?

Price it in 3D, or call a building specialist to confirm colors, size, and options. Free delivery and installation is included in every price.

Open This Design In 3D Call 1-800-324-5315

Color swatches and the rendering on this page are digital approximations of painted steel panels. Trim and ridge cap are color-matched to the roof unless a different trim color is requested at the time of order. Designer pricing is for the delivery state saved with the design and is confirmed on your verification call.