Shop Vertical Roof Metal RV Covers – Our Highest Quality RV Carport, Certified Protection
Vertical roof metal RV covers are our strongest, top-of-the-line RV carport
style, with vertical panels that shed rain and debris down the sides, and
free delivery and professional installation included. Available from 12 ft. to
24 ft. wide and 26 ft. to 41 ft. long — the longest run length of any RV cover we offer
— on 12 ft. legs standard for RVs, boats, and tall equipment. Standard certification is
140 MPH / 25 PSF, with options up to 170 MPH / 65 PSF in most areas. Every unit includes a 3 ft.
side panel with J-trim on each side, and is built from 14-gauge galvanized steel framing
(12-gauge optional in most areas) anchored with rebar or concrete anchors, with optional helical
or asphalt anchors available for ground or asphalt installation. Add an extended gable end to
keep blowing rain off the back of your RV, close in an end or the sides, and choose from 14
color options, with financing available for qualifying customers.
Why Choose A Vertical Roof Metal RV Cover?
- ✓ Strongest RV cover style we offer
- ✓ Vertical roof panels shed rain & debris down the sides
- ✓ 14-gauge galvanized steel framing (optional 12-gauge in most areas)
- ✓ 29-gauge roof panels resist rust, fading, and fire (optional 26-gauge in most areas)
- ✓ Standard 140 MPH / 25 PSF certification (optional up to 170 MPH / 65 PSF in most areas)
- ✓ Priced up to 41 ft.(Longer options available)
|
|
Vertical Roof Style Metal RV Covers For Sale — 12 Ft. To 24 Ft. Wide
Vertical roof style metal RV covers — A-frame type, with panels running top to bottom for
the best rain and debris runoff — are available from 12 ft. to 24 ft. wide and 26 ft. to
41 ft. long, the longest run length of any RV cover we carry. These standard sizes cover most
customers' needs and save time and money. Custom sizes between these dimensions can be built and
are priced the same as the next size up — a 10′6″ wide unit is priced the same
as a 12′ wide unit, and a 28′ long unit is priced the same as a 31′ long unit.
Price includes: certification package, 12′ legs, one 3′ panel down each side with
J-trim, 14-gauge frame, rebar or concrete anchors, all legs and bows set 5′ on center, all
required leg bracing, and one center brace on every bow. An extended gable end is recommended
for the back of your RV — it strengthens the cover and comes down even to the 3 ft. side
panels to keep blowing rain off the back of your RV. You can also close one end and/or the sides
to the ground, and choose from 14 color options for the roof, side panels, and trim.
Clear span certified metal structures up to 60′ wide and 301′ long are available in most states.
Service Area
Free delivery and installation is included in most areas of the states listed within the
factory service area. Pricing shown above applies to customers located in Alabama,
Arkansas, Georgia, Indiana, Kentucky, Louisiana, Mississippi, North Carolina, Oklahoma,
South Carolina, Tennessee, Texas, and Virginia. Not all areas within these states are
included in the service area — contact us to confirm availability in your location.
Call 1-800-324-5315 for service area details.
Certification & Financing
Many cities and counties require building certification. Certification is based on
installation on an existing concrete slab with a proper footing, or on the use of
optional helical anchors for installation on ground or asphalt — helical anchors
are required for certification in those cases. Free generic engineering plans are
available after purchase in most states we service. Site-specific plans or wet-seal
prints carry an additional charge where generic plans aren't available, and all paid
plans are released only after the order and payment are received. Higher wind speed
and/or snow load certification is available in most states for an additional charge.
Certification and warranties vary by manufacturer.
Financing is available with approved credit. Financing and rent-to-own options are not
available in all states — call for details.
Delivery & Installation Process
Once your order is placed, the factory schedules delivery directly to your property.
A local installation crew sets the frame, secures all legs and bows, installs your side
panels and any closed ends, and anchors the structure to your slab or ground surface
according to your certification requirements.
Before the crew arrives, make sure the installation site is level and clear of vehicles,
debris, and overhead obstructions — and confirm your RV, boat, or equipment fits
comfortably under the 12 ft. leg height. If you're installing on ground or asphalt rather
than an existing slab, optional helical anchors will need to be added to your order ahead
of time to meet certification requirements.
?
Still have questions?
Our FAQ covers sizing, certification, financing, and installation in detail.
Read The FAQ
For Assistance Ordering Your Vertical Roof Metal RV Cover
We're here to help you find the perfect vertical roof metal RV cover for your home or business.
Call Monday to Friday, 8:30 AM to 7:00 PM Central Time, and Saturday, 9:00 AM to 3:00 PM Central
Time, for a free quote or help with your order.
Call 1-800-324-5315
Thank you for visiting Metal Carport Depot LLC! All photos are for illustration purposes only.
|
|
|
